I took it to a truck and trailer shop thinking they would have experience to do good work. It turns out they didn't want to deal with it. The guy I was dealing with said he talked with a local welder who was willing to do the work. Since I dropped it off Tuesday just before the 4th of July weekend no work was done. The following week I was on vacation kayaking with my brothers so I was happy the welder would at least tow it to his shop. When I talked with him he was aware of Dexter but but wasn't interested in doing the legwork of chasing down the numbers with
Scamp. I returned from vacation on Friday. I called Scamp but only got voicemail. Left several messages but got no response yet. I called Dexter and told them I needed a 6'
axle with a 22 degree down starting angle and an 8 inch arm... That's where the problem started. I don't know if the frame is 72" or the Hub face to Hub face is 72". So long story short, I suck at timing because I want to use the Scamp on the 25th of July and it may not be tow ready.