Upper Shelves in a Trillium (Pictures)

[Roy in TO]

I want to install the rear upper shelves in my Trillium for this winters project after I finish replacing the wood around the windows.



I couldn't find many pictures of the various components searching the forum and felt that having a thread showing how they were installed would be helpful to myself and others. I was able to find some parts but I'm not sure if I have them all.



If you have any pictures of the various components and how they are positioned for either the front or rear upper shelf it would be a great help. Plus if you've done any mods, this might be a good thread to post those in as well so everything might be found in one place.


Thanks.

[David Tilston]

Good topic Roy! I have noticed a good deal of variations in the upper shelves on Trillium 4500's. Some have the outer corners closed off. On others the whole width is usable. I have recently seen one that had doors on the sides, over the rear dinette. Some also have a mix of aluminum and fibreglass shelves.

[Raz]

Here's the rear shelf in my 2010. One side is bolted to the upper kitchen cabinet. The other is bolted to the closet. Sides and rear are screwed into the plywood window spacer. They used short drywall screws and a washer. Be careful not to screw into the shell. The netting I added.

https://www.fiberglassrv.com/forums/...ves-47934.html


The front shelf is attached to the kitchen cabinet on one side and the door pillar on the other. Again screws into the window spacer.

[spidermoore]

I have a 4500 with the upper shelving in both the front and back, but without the sliding doors. Does anyone have measurements for those so they could be recreated? I can probably figure it out but if someone has actual measurements of existing, that would be handy.